The MTI Mini Tab Inserter Paper shooter Counting Tab inserter tab marking machine
The MTI Mini Tab Inserter is our smallest solution for on press counting and tab inserting. With its small dimensions of 75x75x45mm the MTI can be mounted inside the delivery of many presses and die cutters.
MTI MINI TAB INSERTER
Designed to take up the minimum amount of space, the MTI mini tab inserter can be mounted directly to the side jogging plates inside the delivery. The tape reel holder and interface box have magnetic mountings for ease of installation.
The programmable interface box receives a count signal either directly from the host machine counter or from a sensor and can be programmed for batch counting of up to 9,999. It has a minus button to allow for any sheets removed from the delivery, cut delay and tab length control along with a total count display.
Typical Applications
Large format presses
Die cutters
Where space is at a premium
Features
Minimal dimensions
Very low maintenance
Programmable Interface box
Magnetic mounting for reel holder and interface box
Benefits
Minimal space requirements
Minimise waste paper
Prevents inaccurate deliveries, overs and unders
Instructions:
1. The function of adding and subtracting one sheet: adding one sheet will not be
used in general; if there is bad quality paper in the process of use, it should be clicked
to subtract one sheet, otherwise the display value on the touch screen will be more
than the actual number of sheets, so there will be insufficient customer complaints
2.Counting: It&39;s a switch button. If you press Counting Open without an insert, it
will show Counting Open. Touch screen will not count and the system will not insert a
label in the case of Counting Open. During normal use, you must press the display
Counting Open.
3. Manual label insertion: In the case of replacing the label paper, when the label
paper is loaded into the label insertion machine, press the manual label, the label
insertion opportunity to send the label paper to the label insertion machine, you can
also press the small button on the label insertion machine to achieve the same effect
4.count volume: set to 1, a piece of paper will be counted, if set to 2, the number
will be multiplied by 2.
5. Bidding time setting: Bidding time setting is to set the length of the label, the
larger the number, the longer the label. If the paper sent out by the labeling machine is
long, then the value behind "Bidding Time Setting" needs to be reduced, and if it is
too short, it needs to be increased.
6.Waiting time for marking: Waiting time for marking is how long to wait for the label to be sent
out before cutting it off. If the time is too short, the label may be blown away by the wind
7.Label Number Setting: Label Number Setting is how many labels need to be labeled once, usually
set to 100 or 200.
8. counting length setting: the setting of counting length does not need to be set in general, or it can
be set at will.
9.Setting the number of sheets of cardboard: The number of sheets of cardboard is generally set to a
larger number on the die-cutting machine or the printing press. It is recommended that it be set to
999999.
10.Total Tension Setting: Total Tension Setting is generally set to a larger number on die-cutting
machine or printing machine. It is recommended to set it to 999999. 6.Installation instructions: press the installation instructions to
display the following pictures.
If you have any technology or business enquiries,
please click on contact us.